Hinged Base Systems Make Rugby Goal Post Installation Easy

There's more to installing rugby union goal posts than just sticking some posts in the ground and attaching the crossbar, but with the right equipment and guidance it can be a very simple process.

Rugby goal posts can be installed either directly into a ground sleeve or on a hinged base. While a ground sleeve is perfectly suitable for shorter goal posts as it is easy enough to insert the post spigot into the ground sleeve with a few people, this becomes exponentially more difficult the taller the post becomes as the increased weight and height make it harder to safely and readily manoeuvre it. The solution is a hinged base system.

The hinged base, as its name implies, is a base that hinges at the base to raise or lower the post safely. A base plate is attached to the goal post and a hinged plate is fixed to the base. This system is then held to the ground by the bolts provided that are set into a concrete footing. Once properly bolted to the footing, the goal post can be easily raised from a horizontal position by walking it into the upright position either by hand or with a roller system or field tractor.

With the top of the bolts at least 20mm below the surface, the hinge plate can be covered by the sod removed to dig the hole. Recessing the system is important to avoid any protrusions that may cause injury.

The added benefit of the hinged base system is that the posts can be levelled in situ. Hinged base systems allow for finer tuning to ensure the posts are truly straight the first time.

A hinged base system makes installation and removal easy and safe, meeting OH&S compliance for heavy lifting. Full DIY installation details are provided with all PILA goal posts or talk to us about a delivered and installed package. Hinged base systems are also available for AFL goal posts and rugby league goal posts.

For more information contact PILA sport on 13 7452 or info@pilagroup.com.au